U5
Prix : 25,00 € H.T. / jour
30  € T.T.C.
30  € T.T.C.
- Smooth musical detail and sonic excellence
- Variable gain preamp to +30dB.
- Dual microphone and line outputs
- Hi-Z 3,000,000 ohm input impedance
- Very low noise -100dB
- High headroom +30dB
- Six tone bank selections.
- DC coupled Class A output for superior bass
- High cut switch eliminates noise
- LED active signal indicator
- Headphone monitor output jack
- Low distortion less than 0.5% THD and IMD
- High level 400 watt speaker input
- Active to thru selector - ground isolation switch
- 100% discrete power supplies for audio path
- Internal toroidal power supply for low noise
- Long lasting, stainless steel hardware
Circuit Topology: | 100% discrete, high-voltage Class A |
Gain: | Switched 3dB steps, maximum gain +30dB |
Input Impedance: | 3 ,000,000 ohm unbalanced (single ended) |
Maximum Input Level | +24dBu unbalanced, 400w speaker input |
Output Connectors (2): | XLR type, pin 2 hot electronic balanced |
Maximum Output Level (Class A): | +30dBu DC coupled, balanced 600 ohms (mic and line out) |
Headphone Output: | 0.5w into 600 ohms |
Noise 20kHz Unweighted: | -100dBu minimum gain position |
Distortion THD, IMD: | 0.1% at +10dB |
Frequency Response, -/+0.5dB: | 5Hz to 100kHz |
Frequency Response, -3dB: | 1Hz to 500kHz (input band limited) |
High Cut Filter: | -3dB at 8kHz minimum phase design |
Tone Selector: | Six position rotary switch, all passive filters |
AC Power: | Internal toroidal AC supply |
Dimensions: | 8.5 x 3.5 x 12 in (216 x 88 x 305mm) |
Weight-Packed: | 12lbs (5.4kg) |
Écrire un avis
Votre nom :Votre avis : Note : Le HTML n’est pas pris en charge !
Évaluation : Mauvais Bon
Saisir le code ci-dessous :
Description
- Smooth musical detail and sonic excellence
- Variable gain preamp to +30dB.
- Dual microphone and line outputs
- Hi-Z 3,000,000 ohm input impedance
- Very low noise -100dB
- High headroom +30dB
- Six tone bank selections.
- DC coupled Class A output for superior bass
- High cut switch eliminates noise
- LED active signal indicator
- Headphone monitor output jack
- Low distortion less than 0.5% THD and IMD
- High level 400 watt speaker input
- Active to thru selector - ground isolation switch
- 100% discrete power supplies for audio path
- Internal toroidal power supply for low noise
- Long lasting, stainless steel hardware
Écrire un avis
Votre nom :Votre avis : Note : Le HTML n’est pas pris en charge !
Évaluation : Mauvais Bon
Saisir le code ci-dessous :
Dernières consultations