Visites
00082311
  Depuis le:
30 Novembre 2014
 
Visiteur aujourd'hui 17
Total Visiteurs 82311
Hits aujourd'hui 68
Total Hits 519736
Visiteurs Online 6

Powersoft K8

Powersoft
Modèle :K8
Disponibilité : 8
Lu : 2167 fois
Prix : 70,00 € H.T. / jour
84  € T.T.C.
General  
Number of channels 2
   
Output power Single channel mode   Bridge mode
2 Ω 4 Ω 8 Ω       4 Ω 8 Ω    
  4800 W 3000 W 1500 W       9600W 6000W    
Max output voltage / current 169 Vpeak / 125 Apeak     338 Vpeak
   
AC Main Power  
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V   230 V
Idle 91 W 1.3 A   84 W 1.17 A
1/8 of max output power @ 4 Ω 938 W 9.5 A   938 W 4.8 A
1/4 of max output power @ 4 Ω 1875 W 17.4 A   1875 W 8.7 A
   
Thermal  
Operating temperature range 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V   230 V
Idle 546 BTU/h 137.6 kcal/h   546 BTU/h 137.6 kcal/h
1/8 of max output power @ 4 Ω  BTU/h 269.4 kcal/h   982 BTU/h 269.4 kcal/h
1/4 of max output power @ 4 Ω 1593 BTU/h 401.4 kcal/h   1593 BTU/h 401,4 kcal/h
   
AUDIO  
Gain 26 dB 29 dB 32 dB 35 dB
Input sensitivity 5.50 V 3.90 V 2.75 V 1.95 V
Max input level 27 dBu 24 dBu 21 dBu 18 dBu
Gate -52 dBu -55 dBu -58 dBu -61 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 110 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 66 dB @ 1kHz
THD+N 0.5% from 1 W to full power (typically
IMD 0.5% from 1 W to full power (typically
Input impedance 10 kΩ balanced
Slew rate 50 V/μs @ 8Ω, input filter bypassed
Damping factor > 5000 @ 20-200 Hz
   
Front panel  
Indicators and Controllers 2 x LED bar - Signal level and over-temperature protection
4 x Push-button - Setting operating parameters
1 x Display - Settings and monitoring
1 x Power switch -
Connectors  
AC main 1 x AMP CPC 45A connector - 45 A max (region-specific power cord provided)
Audio signal input 2 x Combo Jack/XLR-F - Signal input
1 x Analog/Digital input - Switchable Analog line/AES3 digital input on channel 2
Remote command 1 x 2 pin Phoenix MC 1.5/2-ST-3.81 - Remote line/aux switch
Loudspeakers 2 x speakON - Neutrik NL4MD
Network/data 2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
1 x Rj45 socket - RS485 data connection (non-DSP version)
  Manuel

Écrire un avis

Votre nom :


Votre avis : Note : Le HTML n’est pas pris en charge !

Évaluation : Mauvais           Bon

Saisir le code ci-dessous :



Description

General  
Number of channels 2
   
Output power Single channel mode   Bridge mode
2 Ω 4 Ω 8 Ω       4 Ω 8 Ω    
  4800 W 3000 W 1500 W       9600W 6000W    
Max output voltage / current 169 Vpeak / 125 Apeak     338 Vpeak
   
AC Main Power  
Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V   230 V
Idle 91 W 1.3 A   84 W 1.17 A
1/8 of max output power @ 4 Ω 938 W 9.5 A   938 W 4.8 A
1/4 of max output power @ 4 Ω 1875 W 17.4 A   1875 W 8.7 A
   
Thermal  
Operating temperature range 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V   230 V
Idle 546 BTU/h 137.6 kcal/h   546 BTU/h 137.6 kcal/h
1/8 of max output power @ 4 Ω  BTU/h 269.4 kcal/h   982 BTU/h 269.4 kcal/h
1/4 of max output power @ 4 Ω 1593 BTU/h 401.4 kcal/h   1593 BTU/h 401,4 kcal/h
   
AUDIO  
Gain 26 dB 29 dB 32 dB 35 dB
Input sensitivity 5.50 V 3.90 V 2.75 V 1.95 V
Max input level 27 dBu 24 dBu 21 dBu 18 dBu
Gate -52 dBu -55 dBu -58 dBu -61 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 110 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 66 dB @ 1kHz
THD+N 0.5% from 1 W to full power (typically
IMD 0.5% from 1 W to full power (typically
Input impedance 10 kΩ balanced
Slew rate 50 V/μs @ 8Ω, input filter bypassed
Damping factor > 5000 @ 20-200 Hz
   
Front panel  
Indicators and Controllers 2 x LED bar - Signal level and over-temperature protection
4 x Push-button - Setting operating parameters
1 x Display - Settings and monitoring
1 x Power switch -
Connectors  
AC main 1 x AMP CPC 45A connector - 45 A max (region-specific power cord provided)
Audio signal input 2 x Combo Jack/XLR-F - Signal input
1 x Analog/Digital input - Switchable Analog line/AES3 digital input on channel 2
Remote command 1 x 2 pin Phoenix MC 1.5/2-ST-3.81 - Remote line/aux switch
Loudspeakers 2 x speakON - Neutrik NL4MD
Network/data 2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
2 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
1 x Rj45 socket - RS485 data connection (non-DSP version)

Écrire un avis

Votre nom :


Votre avis : Note : Le HTML n’est pas pris en charge !

Évaluation : Mauvais           Bon

Saisir le code ci-dessous :



Powersoft K6
50,00 € H.T. / jour
Disponible en parc : 12
Powersoft K10
80,00 € H.T. / jour
Disponible en parc : 4
Etiquettes : powersoft, amplification

SNO TECHNIQUE © 2019
v 1.0.11.14